Products

Clear product families, not a crowded catalogue.

Seventeen catalyst grades and seven inhibitors, organised by the problem each one solves. Every grade is supplied with a TDS, a batch-linked COA and sample quantities for evaluation.

Product centre

Three ways to reach the right grade.

Most buyers arrive with one of three questions: which property do I need, which application am I in, or which concentration does my line run. Start from whichever is clearest.

By performance requirement

Anti-yellowing, high temperature, anti-poisoning, high refractive index or standard curing.

By application

PPF, release liners, optical films, medical LSR, potting and high-voltage insulation.

By concentration

From 1,500 PPM for cost-sensitive compounding to 5,000 PPM for fast cross-linking.

Quick reference

All catalyst grades at a glance.

Use this table to shortlist, then open a grade for the full specification, dosage guidance and pairing inhibitors.

ModelSeriesPlatinum concentrationViscosityStatus
PC-11Standard Series1,500 PPM400–500 cPAvailable
PC-12Standard Series5,000 PPM400–500 cPAvailable
PC-13Standard Series3,000 PPM400–500 cPAvailable
PC-14Standard Series4,000 PPM400–500 cPAvailable
PC-15Standard Series2,000 PPM400–500 cPAvailable
PC-16Standard Series4,000 PPM-1400–500 cPAvailable
PC-41High-Activity Series1,500 PPM400–500 cPAvailable
PC-43High-Activity Series3,000 PPM400–500 cPAvailable
PC-44High-Activity Series4,000 PPM400–500 cPAvailable
PC-45High-Activity Series2,000 PPM400–500 cPAvailable
PC-46High-Activity Series4,000 PPM-1400–500 cPAvailable
PC-42Anti-Yellowing Series5,000 PPM300–500 cPAvailable
PC-50Anti-Yellowing SeriesCustom (1,000–20,000 PPM)5–50 cPAvailable
PC-51Anti-Yellowing SeriesCustom (1,000–20,000 PPM)5–50 cPAvailable
PC-18BAdvanced Anti-PoisoningCustom (1,000–20,000 PPM)400–500 cPAvailable
PC-18AAdvanced Anti-PoisoningCustom (1,000–20,000 PPM)400–500 cPR&D · sample
GZ-5Optical GradeCustom (1,000–20,000 PPM)400–800 cPAvailable

Platinum concentration is the nominal active Pt content. Custom concentrations from 1,000 to 20,000 PPM are available on request; all grades are supplied in 1 kg, 5 kg and 20 kg sealed HDPE drums.

Product form

What arrives at the plant.

A sample bottle and the production pack sizes. Every container is sealed, labelled with grade and batch, and shipped with a COA for that batch.

Glass bottle of PC®-14 platinum catalyst with a printed grade label
PC®-14 standard grade, sample bottle4,000 PPM standard series. The label states grade, concentration and compliance wording; the production drum carries the same information plus the batch COA.
White HDPE bottle and two HDPE jerry cans used for the PC® series
1 kg, 5 kg and 20 kg HDPE packagingEvery size is sealed, labelled by grade and batch, and shipped with a batch COA. HDPE keeps the catalyst out of light and is compatible with the carrier solvents used in the series.
Inhibitors

The pot life control system.

Curing time is set by the inhibitor, not by the catalyst. Seven grades cover ambient cure, medium-high temperature cure, high-efficiency alkynol chemistry and high-refractive systems.

PC-6110.1%–1.0%

Medium-to-high temperature

The default inhibitor for medium-to-high temperature cure systems. Buys bench and line time without slowing the cure once the part reaches temperature.

Colorless viscous liquidDetails
PC-6120.1%–1.0%

Medium-to-high temperature

For plants that need a full week of pot life and still want the same hot cure. Same dosage window as PC-611, longer open time.

Colorless viscous liquidDetails
PC-6130.1%–1.0%

Ambient / low temperature

For ambient-cure systems and heat-sensitive substrates. Lets the compound cure in minutes to hours at room temperature without an oven.

Colorless viscous liquidDetails
PC-6140.1%–1.0%

Ambient / low temperature

Ambient-cure inhibitor with a longer hold and lower viscosity than PC-613, for formulations that need more working time at room temperature.

Colorless viscous liquidDetails
PC-6170.01%–0.20%

High efficiency, non-hazardous

A silicone-modified alkynol inhibitor: strong inhibition at a tenth of the usual dosage, non-hazardous, and a crisp cure at about 140°C. Best cost-performance in the range.

Pale yellow liquidDetails
GZ-6120.1%–1.0%

High-RI systems

Inhibitor for high-RI systems that need low-to-medium temperature cure. Designed to pair with GZ-5 without clouding the optical compound.

Colorless viscous liquidDetails
Concentration ladder

1,000 to 20,000 PPM, in practical bands.

Concentration is not a quality grade — it is a way to match catalyst loading to line speed, section thickness and inhibitor dosage. Standard grades cover the most common bands; anything between them is supplied to order.

1,000–2,000 PPM
Cost-sensitive compounding
3,000–4,000 PPM
Balanced cure and economics
5,000 PPM
Fast cross-linking
Above 5,000 / custom
Custom, made to order
Next step

Request a sample or get a quote

Tell us the grade, target PPM and application. Our technical team replies within 24 hours with a recommended grade and sample lead time.

Technical reply within 24 hours
Evaluation samples in 5–7 days
COA, TDS and SDS on request
Custom concentration 1,000–20,000 PPM