Standard Karstedt's Catalysts
PC-11 to PC-16 form the volume backbone of the range: high-purity Karstedt's catalyst in six platinum concentrations from 1,500 to 5,000 PPM, all at 400–500 cP and compatible with the full inhibitor range. These are the grades most commonly used for general-purpose compounding, moulding and high-precision coating lines, and the ones we recommend when a formulation is being matched from an existing supplier.
Grades in this family.
| Model | Pt concentration | Appearance / viscosity | Recommended dosage | Status |
|---|---|---|---|---|
| PC-11 | 1,500 PPM | Colorless, transparent, 400–500 cP | 0.05%–0.5% of total compound | Available |
| PC-12 | 5,000 PPM | Colorless, transparent, 400–500 cP | 0.05%–0.5% of total compound | Available |
| PC-13 | 3,000 PPM | Colorless, transparent, 400–500 cP | 0.05%–0.5% of total compound | Available |
| PC-14 | 4,000 PPM | Colorless, transparent, 400–500 cP | 0.05%–0.5% of total compound | Available |
| PC-15 | 2,000 PPM | Colorless, transparent, 400–500 cP | 0.05%–0.5% of total compound | Available |
| PC-16 | 4,000 PPM-1 | Colorless, transparent, 400–500 cP | 0.05%–0.5% of total compound | Available |
Add 0.05%–0.5% of total compound mass as a starting point; adjust against line speed, section thickness and inhibitor dosage. Do not allow direct contact with hydrogen-containing silicone oil or pure inhibitor before mixing. Shake before use.
Choose by concentration.
1,500 PPM
The general-purpose grade. 1,500 PPM is the most widely used concentration for large-volume silicone compounding, where a predictable cure at moderate catalyst cost matters more than speed.
5,000 PPM
The high-concentration workhorse. 5,000 PPM delivers fast cross-linking for lines that need short cycle times, and it is the grade most often specified for injection and rapid-cure processes.
3,000 PPM
The middle grade, chosen when 1,500 PPM is too slow and 5,000 PPM is more catalyst than the formulation needs. A common starting point for balancing cure speed against raw-material cost.
4,000 PPM
High-activity grade for automated production lines, where consistent cure start and short residence time reduce scrap at start-up and shut-down.
2,000 PPM
The default grade for industrial silicone moulding. 2,000 PPM sits between the economy and high-speed grades and is the grade most often used to match an existing moulding formulation.
4,000 PPM-1
A batch-controlled 4,000 PPM grade for high-precision coating lines. The -1 suffix denotes the tight-tolerance batch configuration used where coat weight and cure are measured, not estimated.
Complete the curing system.
The catalyst sets the cure speed; the inhibitor sets how long the batch stays workable. Medium-high temperature cure with hours-to-one-week pot life, or high-efficiency alkynol inhibition with cure at about 140°C.
Recommended to use with PC-611 / PC-612 / PC-617 Silicone Inhibitors for precise curing control.
Not sure about the ratio? Send your cure temperature and target bath life — we will return a starting dosage for both components.
Where this family is used.
Open an application page for process parameters, field data and the recommended grade set.
How do I know which Standard Series grade fits my line?
Start from the concentration band your current formulation uses, then confirm cure speed and colour against a sample. If you do not have a current reference, send your line speed, cure temperature and section thickness for a recommendation.
Can I get a custom concentration in this family?
Yes. Concentrations from 1,000 to 20,000 PPM are supplied to order; the batch COA states the measured platinum content.
What documentation is supplied?
A TDS per grade, an SDS in the requested language, a batch COA and a RoHS/REACH compliance statement on request.
Request a sample or get a quote
Tell us the grade, target PPM and application. Our technical team replies within 24 hours with a recommended grade and sample lead time.