About / Factory capabilities

A catalyst plant, described by what it can do.

This is not a company profile. It describes four capabilities that determine what a catalyst buyer receives: how the material is synthesised, how consistent it is between batches, how it is tested, and how it is packed and shipped. Company details are provided during quotation.

One site, one chain of custody

Synthesis to sealed drum, without a handover.

A catalyst is a small fraction of a compound and a large fraction of whether that compound cures. Keeping synthesis, dilution, testing and packing on one site removes the point where a grade is re-diluted or relabelled between the reactor and the drum.

It also shortens the path between a customer question and a technical answer: the same team that measures the batch reviews the sample request, so a recommendation traces back to a measured lot rather than a catalogue page.

Vials · film · sealed drums

The product forms the plant handles daily: catalyst in sealed vials and drums, and the films and coatings the grades are formulated into.

Four capabilities

What the site can do, and why it matters to a formulator.

Each capability answers a question that appears in a supplier audit: where the material is made, how consistent it is, how it is verified, and how it arrives.

Synthesis and refining

Platinum complex synthesis, purification and dilution to the ordered concentration happen on one site, so the grade is not re-diluted by a third party before it reaches the drum. Standard grades from 1,500 to 5,000 PPM and custom grades from 1,000 to 20,000 PPM follow the same controlled route, with the batch record carrying the measured platinum content.

Batch consistency

A drum ordered in March should cure like the drum ordered in June. That is enforced with batch records, retained samples stored under the same sealed 5–15°C conditions as shipped material, and a COA for every lot. Batch-controlled -1 grades tighten tolerance further for lines that measure coat weight and cure.

Testing capability

Platinum content is verified at PPM level, trace impurities are screened for the species that cause yellowing and poisoning, and cure behaviour is checked against a formulation window. Accelerated colour aging at 85°C for 48 hours, with the comparison sample in the same run, is the test behind the published ΔE data.

Delivery and packaging

Catalyst ships in 1 kg, 5 kg and 20 kg sealed HDPE drums with a 6-month shelf life at 5–15°C, and the packaging on the quotation is the packaging you receive. Evaluation quantities leave first, by air with tracking, so a formulation is proven before a production order is committed.

Quality flow

Four gates before a drum is released.

The flow is short because a platinum catalyst is a small-volume product: verification, synthesis, release testing and retention. Each gate produces a record.

01

Incoming verification

Platinum feedstock, solvents and packaging are checked against specification before release to synthesis. A lot that does not match is not consumed and does not enter a batch record.

02

Synthesis and refining

The complex is formed, purified and diluted to the ordered concentration under a batch record carrying the target value, process parameters and operator record.

03

QC release

Platinum content, trace impurities and cure behaviour are measured against the release criteria. The batch is released only when all three agree with the specification.

04

Retain and document

A retained sample is stored beside the shipped material and the COA is linked to the batch number, so a question raised months later is checked against the actual lot.

Documents and certification

Statements, not certificate theatre.

The factory issues TDS, SDS, COA, RoHS and REACH compliance statements, and shelf-life and packaging specifications. What it does not do is display certificate numbers or issuing bodies that a reader cannot verify — the discipline described on the compliance page.

  • COA per batch, linked to the drum label and retained sample
  • TDS and SDS per grade, issued as the current revision
  • RoHS and REACH compliance statements on request
  • Medical cases describe the end device, never catalyst approval
For the audit file

What an audit usually reviews.

  • Batch records for the grades in scope
  • Release test results and COA examples
  • Retained-sample store and storage conditions
  • Packaging, labelling and shipping documentation

Audit scope and dates are agreed through the quotation contact, and the documentation pack is shared in advance so the visit focuses on verification.

Visit the factory

Video tour or on-site audit.

Most customers never need to visit. These two routes exist for procurement and quality teams who do — or who need evidence before approving a supplier.

Remote

Factory video tour

A recorded walk-through of the synthesis bay, QC laboratory, retained-sample store and packing area. It is shared during quotation rather than published here, because the footage shows equipment layout and process detail. Ask for it with the quote request and name the grade family you are evaluating.

On site

Audit request

On-site audits are scheduled through the quotation contact with a defined scope: synthesis area, QC laboratory, retained-sample store, packing and warehousing. Send proposed dates, the checklist you will use and the size of the visiting team; the documentation pack is shared beforehand.

Factory access and company identification are confirmed during quotation. This site keeps operations described by capability so that product information remains the focus.

Next step

Start with the capability that matters to your process.

Send the grade family, the application and the evidence your quality team needs — a COA, a compliance statement, a video tour or an audit date. The reply within 24 hours will confirm what can be shared and when.

Technical reply within 24 hours
Evaluation samples in 5–7 days
COA, TDS and SDS on request
Custom concentration 1,000–20,000 PPM