Products / High-Activity Series

High-Activity & Anti-Poisoning Catalysts

PC-41 to PC-46 mirror the standard concentration grades but with enhanced catalytic activity and improved resistance to substrate contaminants. They are the practical choice when a line runs below ideal conditions — recycled filler, variable cure ovens, long pot life between mixing and shaping — and curing failures are costing yield rather than indicating a formulation fault.

Specification

Grades in this family.

ModelPt concentrationAppearance / viscosityRecommended dosageStatus
PC-411,500 PPMColorless, transparent, 400–500 cP0.05%–0.5% of total compoundAvailable
PC-433,000 PPMColorless, transparent, 400–500 cP0.05%–0.5% of total compoundAvailable
PC-444,000 PPMColorless, transparent, 400–500 cP0.05%–0.5% of total compoundAvailable
PC-452,000 PPMColorless, transparent, 400–500 cP0.05%–0.5% of total compoundAvailable
PC-464,000 PPM-1Colorless, transparent, 400–500 cP0.05%–0.5% of total compoundAvailable

Add 0.05%–0.5% of total compound mass as a starting point; adjust against line speed, section thickness and inhibitor dosage. Do not allow direct contact with hydrogen-containing silicone oil or pure inhibitor before mixing. Shake before use.

Inhibitor pairing

Complete the curing system.

The catalyst sets the cure speed; the inhibitor sets how long the batch stays workable. Same inhibitor window as the standard series, with better cure stability where the substrate is contaminated.

Recommended module

Recommended to use with PC-611 / PC-612 / PC-617 Silicone Inhibitors for precise curing control.

Not sure about the ratio? Send your cure temperature and target bath life — we will return a starting dosage for both components.

How do I know which High-Activity Series grade fits my line?

Start from the concentration band your current formulation uses, then confirm cure speed and colour against a sample. If you do not have a current reference, send your line speed, cure temperature and section thickness for a recommendation.

Can I get a custom concentration in this family?

Yes. Concentrations from 1,000 to 20,000 PPM are supplied to order; the batch COA states the measured platinum content.

What documentation is supplied?

A TDS per grade, an SDS in the requested language, a batch COA and a RoHS/REACH compliance statement on request.

Next step

Request a sample or get a quote

Tell us the grade, target PPM and application. Our technical team replies within 24 hours with a recommended grade and sample lead time.

Technical reply within 24 hours
Evaluation samples in 5–7 days
COA, TDS and SDS on request
Custom concentration 1,000–20,000 PPM