Pot life control system

GZ-612

Inhibitor for high-RI systems that need low-to-medium temperature cure. Designed to pair with GZ-5 without clouding the optical compound.

Dosage 0.1%–1.0%High-RI systems Available
Specification

Cure behaviour.

Cure behaviourLow-to-medium temperature vulcanisation in high-refractive-index (phenyl) systems.
AppearanceColorless viscous liquid, odourless
Recommended dosage0.1%–1.0%
ClassificationSee SDS; alkynol grades are non-hazardous
Key properties

Why use GZ-612.

  • High-RI compatible
  • Low-to-medium temperature cure
  • Pairs with GZ-5
Dosage note

Start at the lower end of the dosage range and increase in steps. Over-dosage shows as a soft or tacky cure; under-dosage shows as a short bath life or scorch in the mixing vessel.

Pairs with

Catalyst pairing.

GZ-612 is supplied as part of a complete curing system. We recommend trialling it with the catalysts below so the ratio reflects your actual process window.

Start the trial

Request a paired sample set.

We ship the inhibitor together with the catalyst grade so the first lab trial is representative of your production ratio.

Next step

Request a sample or get a quote

Tell us the grade, target PPM and application. Our technical team replies within 24 hours with a recommended grade and sample lead time.

Technical reply within 24 hours
Evaluation samples in 5–7 days
COA, TDS and SDS on request
Custom concentration 1,000–20,000 PPM