Products / Advanced Anti-Poisoning

Advanced Anti-Poisoning Catalysts

Catalyst poisoning is one of the least visible causes of a non-curing batch. PC-18B is the first-generation grade for environments with slight to moderate poisoning agents, and PC-18A is the second generation, engineered against high concentrations and multiple contaminant types. PC-18A is under final R&D and available for evaluation samples only.

Specification

Grades in this family.

ModelPt concentrationAppearance / viscosityRecommended dosageStatus
PC-18BCustom (1,000–20,000 PPM)Colorless, transparent, 400–500 cP0.05%–0.5% of total compoundAvailable
PC-18ACustom (1,000–20,000 PPM)Colorless, transparent, 400–500 cPEvaluation quantities onlyR&D · sample

Add 0.05%–0.5% of total compound mass as a starting point; adjust against line speed, section thickness and inhibitor dosage. Do not allow direct contact with hydrogen-containing silicone oil or pure inhibitor before mixing. Shake before use.

Inhibitor pairing

Complete the curing system.

The catalyst sets the cure speed; the inhibitor sets how long the batch stays workable. Keep the mixed batch workable through the potting window; identify the contamination source before raising dosage.

Recommended module

Recommended to use with PC-611 / PC-612 Silicone Inhibitors for precise curing control.

Not sure about the ratio? Send your cure temperature and target bath life — we will return a starting dosage for both components.

How do I know which Advanced Anti-Poisoning grade fits my line?

Start from the concentration band your current formulation uses, then confirm cure speed and colour against a sample. If you do not have a current reference, send your line speed, cure temperature and section thickness for a recommendation.

Can I get a custom concentration in this family?

Yes. Concentrations from 1,000 to 20,000 PPM are supplied to order; the batch COA states the measured platinum content.

What documentation is supplied?

A TDS per grade, an SDS in the requested language, a batch COA and a RoHS/REACH compliance statement on request.

Next step

Request a sample or get a quote

Tell us the grade, target PPM and application. Our technical team replies within 24 hours with a recommended grade and sample lead time.

Technical reply within 24 hours
Evaluation samples in 5–7 days
COA, TDS and SDS on request
Custom concentration 1,000–20,000 PPM