Technical / Compliance

Compliance stated precisely, and only where documented.

Three positions are stated on this site: RoHS compliance, REACH compliance and a VOC-free addition-cure chemistry. This page explains what each covers, which documents support it, and the claims we deliberately do not make.

Three positions

What the compliance statement covers.

Each position describes the chemistry and the material as supplied. None of them certifies your finished article, and none relies on a logo or certificate number.

RoHS

As a RoHS compliant Karstedt's catalyst range, the grades are compliant with RoHS. The restricted substances in the directive are controlled at material level for the grade supplied — not certified by a number printed on a page. The written statement is issued for the grade and lot you order, because it only means something when it matches the material in the drum.

REACH

REACH compliance covers the registration position of the substances in the product and screening for substances of very high concern. We do not publish an issuing body or registration number, because a reader cannot verify either. What is provided is the compliance statement for the grade, the SDS in the required language and the current SVHC screening position.

VOC-free

Addition-cure platinum systems release no by-products as they cross-link: no peroxide fragments, no acid, no alcohol. The VOC-free position follows from the chemistry rather than from one test coupon, which is why a VOC-free silicone curing agent of this type is used where peroxide systems failed emissions specification.

Document pack

What is available, and how to request it.

Documents are issued per grade and, where relevant, per lot. Nothing below is a static file; each request is reviewed so the document matches the material you are evaluating.

DocumentWhat it coversRequest route
RoHS compliance statementRestricted-substance position for the grade and lot shippedRequest with quotation
REACH statementRegistration position and SVHC screening for the gradeRequest with quotation
Technical data sheet (TDS)Specification, dosage, viscosity, shelf life and packagingRequest from downloads
Safety data sheet (SDS)Hazard classification, handling, storage and transportRequest from downloads
Certificate of analysis (COA)Measured platinum content and lot data for the batch suppliedRequest with sample
Storage and shelf-life statement6 months sealed at 5–15°C, with packaging detailsRequest from downloads
Boundaries

What this site will not claim.

A compliance page is only useful if its limits are visible. These are the statements we decline to make, even where they would be commercially convenient.

We do not publish certificate numbers, issuing bodies or notified-body identifiers. We do not describe the catalyst as FDA approved, and we do not let a medical case imply approval of the product. We do not present PC-18A as a released production grade, and we do not extend a material statement to a finished part.

  • RoHS and REACH are stated as compliance, never as a numbered certificate
  • Medical cases describe the end device, never catalyst approval
  • PC-18A is under final R&D with evaluation samples only
  • Every declaration states the grade and lot it covers
Claims discipline

Why the wording is careful

  • A number a reader cannot verify is a liability, not evidence
  • Compliance belongs to a material, a lot and a scope
  • Approval of an end device is held by the device maker
  • A cure claim depends on the full formulation and the oven
Request documents

Two routes, depending on what you need first.

A compliance statement is usually requested with a quotation; the COA follows the sample or the shipment. Both requests are answered by technical staff.

Compliance and pricing

Request the statement with a quotation.

Send the grade, destination and document you need. The quotation response includes the RoHS and REACH statement, pricing, packaging and lead time. If your customer requires a specific declaration format, attach their template and we will confirm whether it can be completed.

Sample and COA

Request the COA with a sample.

Evaluation quantities ship with a COA for the lot plus the TDS and SDS for the grade. If the compliance statement is needed before internal approval, request both in the same message so the documents travel together.

Compliance FAQ

Common questions.

Can you issue a RoHS certificate with a certificate number?

We issue a written compliance statement, not a numbered certificate. It identifies the grade and lot and is signed by the quality function; it does not name an issuing body or a registration number, because none would be verifiable by the reader.

Does catalyst compliance mean my finished part is compliant?

No. The statement covers the catalyst as supplied. Compliance of the cured article depends on every other ingredient and on your process, so we state the scope of each declaration explicitly.

Is the catalyst FDA approved?

No. A catalyst is an ingredient, not an end device. The FDA Class II reference in a medical case describes the end device the customer built; device validation and submission remain with the customer.

Can the SDS be supplied in another language?

Yes. The SDS is issued per grade and can be provided in the language required for your destination and internal hazard communication. State the language when you request the documents.

Documentation discipline

One revision, one grade, one lot.

Compliance documents are versioned. A statement for a previous revision does not cover a new one, and a statement for one grade does not cover another. Quote the grade and lot from the drum label so the answer matches the material.

Compliance statements describe the product as supplied and are not legal advice. Customers remain responsible for the regulatory status of their finished articles.

Next step

Need a declaration for a specific grade and destination?

Send the grade, the destination and the document your customer requires. We will confirm what can be issued, in which format, and return it with the quotation response.

Technical reply within 24 hours
Evaluation samples in 5–7 days
COA, TDS and SDS on request
Custom concentration 1,000–20,000 PPM