Pot life control system

PC-611

The default inhibitor for medium-to-high temperature cure systems. Buys bench and line time without slowing the cure once the part reaches temperature.

Dosage 0.1%–1.0%Medium-to-high temperature Available
Specification

Cure behaviour.

Cure behaviourCure initiates above 80°C and accelerates rapidly above 100°C. Pot life at room temperature from a few hours up to one week.
AppearanceColorless viscous liquid, 300–500 cP, nearly odourless
Recommended dosage0.1%–1.0%
ClassificationSee SDS; alkynol grades are non-hazardous
Key properties

Why use PC-611.

  • Cure above 80°C
  • Room-temperature pot life of hours to one week
  • Nearly odourless
Dosage note

Start at the lower end of the dosage range and increase in steps. Over-dosage shows as a soft or tacky cure; under-dosage shows as a short bath life or scorch in the mixing vessel.

Pairs with

Catalyst pairing.

PC-611 is supplied as part of a complete curing system. We recommend trialling it with the catalysts below so the ratio reflects your actual process window.

Start the trial

Request a paired sample set.

We ship the inhibitor together with the catalyst grade so the first lab trial is representative of your production ratio.

Next step

Request a sample or get a quote

Tell us the grade, target PPM and application. Our technical team replies within 24 hours with a recommended grade and sample lead time.

Technical reply within 24 hours
Evaluation samples in 5–7 days
COA, TDS and SDS on request
Custom concentration 1,000–20,000 PPM