PC-50
Ultra high-temperature grade with a low-viscosity profile (5–50 cP) for easy dispersion. Remains stable above 150°C for long dwell times, for thick sections and hot-running parts.
Technical data.
| Platinum concentration | Custom (1,000–20,000 PPM) |
| Appearance | Colorless, transparent |
| Viscosity | 5–50 cP |
| Recommended dosage | 0.05%–0.5% of total compound |
| Packaging | 1 kg / 5 kg / 20 kg HDPE drums |
| Shelf life | 6 months; up to 12 months for selected modified grades |
| Light sensitivity | Store sealed, away from direct light |
| Classification | Platinum complex in silicone fluid; see SDS |
Typical values. Actual performance depends on formulation, equipment and process validation. Batch COA states measured platinum content for each lot.
Why this grade.
- Stable above 150°C long-term
- Selected lots rated for excursions up to 300°C (confirm in the TDS)
- Low viscosity for fast, uniform dispersion
- Suitable for thick-section and high-temperature parts
Do not allow direct contact with hydrogen-containing silicone oil or pure inhibitor before mixing. Add the catalyst last, mix thoroughly, and shake the container before use.
Pair with the right inhibitor.
PC-50 is designed to be used with a precision inhibitor; the inhibitor sets the working time without slowing the hot cure.
Recommended to use with PC-611 / PC-612 Silicone Inhibitors for precise curing control.
| Catalyst | 0.05%–0.5% of total compound |
| Inhibitor (medium-high temp) | 0.1%–1.0% (PC-611 / 612) |
| Inhibitor (alkynol type) | 0.01%–0.20% (PC-617) |
| Mixing order | Base + inhibitor, then catalyst |
Request PC-50 samples
Evaluation quantities are available for every grade. Send your formulation window and we will confirm the recommended concentration, inhibitor pairing and sample timeline.